24-hour national service hotline

+86-755-27314498

Flame Retardant Label High Temperature Protective film Series Adhesive Tape Electronic Die-Cutting Electronic Label Recycled materials

Electrolyte corrosion resistant double-sided adhesive tape (Hot Melt/pressure sensitive )

Product name:  CM-M0004
Total thickness (mm): 0.048±0.005
Tape type: hot melt adhesive / pressure sensitive adhesive , double-side coated
Substrate material: 0.012mm PET, Clear
Adhesive thickness (mm): 0.016+0.016
Glue type: synthetic rubber, electrolyte-resistant
Open temperature,time and pressure : 80℃, 48Min, 125Mpa
Initial adhesion (N/mm): PSA surface 0.35±0.15, SUS#304
                                Hot Melt surface <0.15, SUS#304
Adhesion (N/mm):   PSA surface 0.35±0.15, SUS#304
                                Hot Melt surface >0.3, SUS#304
Electrolyte resistance (80℃/6H): the adhesion of hot melt surface >0.3, SUS#304


Detailed introduction

This week, Cheermo will introduce an electrolyte-resistant  double-sided tape (hot melt / PSA) , which is mainly applied in fixing the cells in lithium batteries. The hot melt adhesive is bonded on the aluminum-plastic PP film at high temperature.


Product Features


Soak in electrolyte for 48h without losing viscosity.



Electrolyte resistance (80℃/6H), adhesion >0.3N/mm




Hot melt 80℃/48h/125Mpa. The hot melt adhesive surface can be bonded on the aluminum-plastic PP film at high temperature.






Illustration on the application of Cheermo’s products in mobile phone parts and auxiliary die cutting materials





COPYRIGHT (©) 2018 Shenzhen Cheermo Innovative Adhesive Materials Co, Ltd / 粤ICP备17117258号 All Rights Reserved

Technical support:HUNUO TECHNOLOGY | Share: