In recent years, the rapid development of our market-oriented economy has led to the flourishing of the adhesive label printing industry. After years of development, the market of adhesive paper is polarized.

The first category consists of high-grade adhesive label products. The United States and Japan have high requirements for adhesive labels of Chinese products. Some well-known products have higher requirements for adhesive labels than those in Taiwan and Japan. Generally, large production enterprises have the ability and technology to produce corresponding products that meets the needs businesses, while small enterprises are only left behind.


The other category consists of low-grade adhesive label products. These ordinary adhesive labels are low in grade and cheap in price. Zhengzhou, Hangzhou and Wenzhou are the production bases for such labels, including paper labels, electronic labels, advertising labels and so on. The demands for some adhesive labels (e.g. beer labels) are driven by the development of SMEs, accompanied by the development of low-grade barcode label printers and consumables.

   With the continuous development of market-oriented economy, the quality, materials, varieties and patterns of labels are improved. At present, the scale of sheet paper printing is declining, while web-fed printing is rising in the field of label printing. The consumption of raw materials for high-grade labels is increasing, and more and more film labels are applied to commodities.



Art paper label material

Substrate: coated paper

Substrate thickness (um): 70±3%

Adhesive: hot melt adhesive

Total thickness (um): 183±5%

Substrate: white PEK

Initial adhesion (#): 10~13

Wear-resistant steel adhesion（kgf/inch）： 2~2.8

Holding force (H): >24

High heat resistance: -20~80

1. Provide a full series of imported high-gloss and matte coated paper with different thicknesses. The monomer gram weight of the surface is 80g, 128g, 160g, etc.
2. Use high-, medium- and low-viscosity permanent, reusable and environmentally friendly adhesive, which is suitable for adhesive labels.

3. This product has passed RoHS, Halogen, Phthalates, PAHs and PFOA/PFOS, EN71-3 certification tests.

FDA food certification label

Product name:  PG37(TC)/CL15/WG80
          PPM/CL15/TLT25

Substrate: FDA printing substrate, FDA coated substrate

Substrate thickness (um): 40±5%, 165±5%

Adhesive: FDA

Certification: FDA  177.1520, EU 10/2011, FDA 175.300, GB/T5009.78-2003

Total thickness (um): 60±5%, 35±5%

Substrate: white Glassine backing paper, transparent release backing paper

Initial adhesion (#): 2～6

Wear-resistant steel adhesion (kgf/inch): 0.7~1.8, 0.4~0.8

Holding force (H): >24, >4

High heat resistance: -20~70

1. The surface is treated with single-sided dual coating, which complies with the requirements of FDA 177.1520 food certification and EU 10/2011 food standard.
2. Special food-grade adhesive is used, which complies with the requirements of FDA 175.300 certification and EU 10/2011 food standard.
3. This product does not contain fluorescent brightener, which complies with the requirements for food wrapping paper in GB/T5009.78-2003
4. With special PP matte films, the surface is suitable for printing, bronzing and other high-end operations.
5. This product has strong adhesion for circular, right-angled and curved surfaces. It is particularly suitable for environmentally friendly labeling.